What affects price?

Where your money actually goes on a custom print.

Material volume (the biggest factor)

Filament is priced by weight, and weight scales with model volume. A 10 cm hollow shell weighs a fraction of a 10 cm solid block.

• Scale matters more than you’d think — doubling the size multiplies the cost by ~8.
• Walls and infill — we default to 3 perimeter walls + 15% gyroid infill. Stronger or display-quality settings cost more filament.
• Hollow vs solid — hollow models with internal supports are cheaper and lighter; solid prints feel premium but cost more.

Print time

Printer hours are billable. Time is driven by:

• Layer height — 0.12 mm fine takes ~2× longer than 0.2 mm standard.
• Speed vs quality — faster prints have visible layer lines; fine prints take longer but need less sanding.
• Supports — overhangs add time both to print and to clean up.

Material type

Per kilogram, roughly:

• PLA — cheapest, easy to print, great finish. Default for display pieces.
• PETG — ~20% more than PLA. Stronger, better outdoor and warm-weather performance.
• ASA / ABS — ~30–50% more. Heat-resistant, UV-stable, paint-friendly.
• Specialty (silk, marble, glow, dual-color) — varies; quoted per spool.

Post-processing

Optional labor that turns a raw print into a finished piece:

• Support cleanup only — included.
• Sanding + smoothing — hourly; depends on surface area.
• Priming and painting — hourly; depends on detail and number of colors.
• Assembly — multi-part models bolted, glued, or pin-jointed.

Shipping

Packeta delivery is free over 50 EUR / 1250 CZK. Below that, standard Packeta fees apply.

Want a ballpark before sending an STL? Tell us the rough size and material — we’ll give a price range without committing.